AFM Safecoat MexeSeal

Home » Products » AFM Safecoat MexeSeal

AFM Safecoat MexeSeal


Safecoat® MexeSeal is a very low VOC, low odor, water-based, medium gloss clear sealer for use on interior
stone, brick, concrete or porous tile surfaces where a durable finish and superior protection are needed. It is suitable for recoating many water-based sealers, and is slip and scuff resistant.   Nonhazardous and non-flammable, it has been safely used by and for the chemically sensitive.

USE ON: Safecoat MexeSeal is recommended on substrates such as unpolished marble, limestone, granite, sandstone, slate, fireclay (brick, tile, terra cotta, pavers), concrete (brick, tile, precast panels, cast in place). Always test in small, inconspicuous places before full application. Safecoat MexeSeal is generally not suited for polished surfaces. Not recommended for use on modern Saltillo or quarry tiles without special care.




Hard, durable finish.

Suitable for recoating many waterbased sealers.

Good resistance to scuffing, black heel marks, oil and water.
Easy clean up with dry or damp mop – dirt and foreign
matter do not penetrate the treated surface.

Safely used by and for the chemically sensitive.

Fights indoor air pollution, seals in the outgassing from the

Very low VOC content, meets or exceeds all federal and
state air quality regulations, including California.

Contains no formaldehyde.

COVERAGE: One gallon of Safecoat MexeSeal covers
approximately 300 square feet in one coat depending on surface

CLEAN-UP: Clean tools and equipment while still wet with a
solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME: Under normal conditions, Safecoat
MexeSeal dries to touch in one hour, is recoatable after two hours
and may be opened to traffic after 8-24 hours, depending upon
conditions. Normal conditions include a clean, dry surface,
access to fresh air flow, a dust free environment, moderate
humidity, and temperatures above 55 degrees F. Thick
application, high humidity or conditions other than normal will
cause Safecoat MexeSeal to dry and cure more slowly.

MAINTENANCE: Mop floor periodically with clean water or an
odorless, dye-free, non-volatile all purpose cleaner like
SafeChoice Super Clean. May be scrubbed with white pad and
175 RPM floor machine before recoating.

LIMITATIONS: Unlike conventional sealers, Safecoat sealers are
made without formaldehyde preservatives or toxic mildewcides or
fungicides. Do not contaminate. Store in airtight containers. Do
not use when indoor or surface temperature is below 55°F. Do
not apply where product will be immersed in water, such as
fountains, pools or below ground area. Do not freeze.

Additional information

Weight 15